Here is another in my discouraging backlog of ‘fine but not quite right’ – a pj/lounging set made up of Carolyn pj shorts and a springfield hack. I’ll cover the springfield at the end, since I’ve made a similar hack before. But first, the shorts!
As I keep yammering about, I’m trying to up my loungewear game. I thought a pair of nice pj pants might help matters, so I decided to give the Carolyn pjs from Closet Case Files a go.
I made the largest size in these, which is what my measurements indicate. I’ve misplaced my notes on these so I’m guessing a little bit about the specific adjustments I made. Hopefully I cover everything. I muslined these up first because my experience with the ginger jeans led me to believe this crotch curve might not work for me. I was definitely correct in that suspicion.
I had way WAY too much fabric at the waist and, like the gingers, this was all focussed at the centre seams. When I pinched it out the side seams sat perfectly. I ended up taking almost the same adjustments as the gingers – 2″ total out of the front crotch and I think not quite 4″ out of the back. I was originally going to just elide the faux fly but in the end I chopped it off and reattached it to my adjusted pattern, so it is there. I didn’t bother unpicking the basting on these though.
I also found the back of the legs way waaaaaaaay too wide. Like just sticking way out and I knew that would also result in chub rub, from too much fabric at the inseam. I slashed and folded out some amount of width – I think maybe 1″? The fronts were fine. I couldn’t find any other larger ladies who have made the shorts – I suspect in full pants I would appreciate that extra room in the back, but in the shorts it was just ridiculous. I also lengthened them 1.5″ to get them below where my thighs touch, to reduce chub rub. I had to adjust the cuff as well – the bottom of the shorts is the same size as the cuff so I just measured and chopped.
I was a bit worried they’d be too tight across the bum – there’s just a slight bit of pulling there – but actually they’re ok. They are snug though, and I would consider doing a full butt adjustment next time – one like this or this, not like the colette blog one which adds to the inseam. I don’t need more width at the inseam I need it across the widest part of my butt, basically in the middle of the pattern piece. You can see the pulling more clearly in some of the photos below. It’s ok for this pair – I have movement room and I’m not worried about busting them or anything but I think it’s worth fixing in the next go round.
I was feeling a bit (unreasonably) cranky about the amount of changes I had to make to these, but in the end, I absolutely love them! They feel elegant and comfy at the same time, even though they’re just a simple pair of shorts. The only thing letting them down is that the elastic I chose is a bit firm and I should have made it a bit longer. They are fine, but they are firm enough that I will wake up in the middle of the night needing to go to the bathroom, because they are pressing on my bladder. Not ideal. I don’t think I’ll bother going back and making these looser (the elastic will get a bit less rigid over time anyway), but when I make this pattern again I’ll make sure I don’t go too nuts on that negative ease. I’m also not sure I’d make the pockets again – they’re a bit too tight to use – too much thigh! They add a nice touch though, I guess.
I am definitely keen to make a longer pair, and I want to make the matching top – I’d like to make it out of this same fabric but I need to see if I can get more. I’ll also be planning a warm pair when it gets colder again. I am also seriously seriously considering just making them up in a linen or something and wearing them as actual pants. Do you think I can justify them as fashion pyjamas? I’m on trend! I also think the shirt would make a nice casual camp-shirt style top if you made the collar pointy. Tell me, dear readers – am I losing my grip or is a shirt a shirt?
As for the top I made to go with this, I did the same Springfield/lakeside hack I’ve done before:
I couldn’t find the same pieces I used before, though, so I had to re-draft them. I don’t know if I did something different or if it’s just the vagaries of fabric differences, but there are… issues with this one. The back flaps definitely don’t overlap as much as my last one did, and it drags the yoke down. I think it needs to have a wedge taken out of that yoke – you can see the extra room in it – and the flaps need to overlap much further. I considered unpicking this to do that but honestly I don’t think I’ll bother. Although this is lovely to lounge in (and gets a big thumbs up from S), I do always feel a bit exposed in it. I think if I can find more of this fabric I might just replace the back overlaps with the regular Springfield back. That way I will also be able to sleep in it without getting myself all tangled!
I actually thought through the finishing on this one and bound the bottom edge all in one. But unfortunately by the time I got to the neck and arms, I had run out of fabric for binding – I cut one of the backs wrong and had to recut so I was short. Instead of doing something sensible like using a different fabric for the binding, I cut what I had in half so it was 1″ instead of 2″ and did THE dodgiest binding job that has ever been in the whole world. It’s truly awful, flips out, is fuzzy… So essentially, this top is pretty much unwearable until I fix that. I mean, it’s fine. It won’t fall apart or anything. But I can’t look at it without wincing. This is why I don’t like to sew on a deadline – I tend towards rushing enough anyway, I don’t need the help. I was trying to finish this to take with me to Bali and I shouldn’t have.
I did wear this a bit in Bali but I think the top is going to be put away until I can source more fabric to fix that back. I’m glad I tried this style but in the end, I just don’t think it’s for me. The original Springfield back will make it perfect pjs though. At least it goes with my robe?